Unboxing and Charging the Device #

1. Remove the T650P payment device from the box.
2. Charge the device by plugging the charger into the left-hand side of the device.
3. Ensure the battery level is at least 20% before proceeding with the setup.

Loading Paper into the Device #

1. Open the paper door:
   • Press the sides inward and lift up.
2. Insert the paper roll:
   • Make sure the paper feeds from underneath the roll, not over the top.
3. Close the paper door:
   • Let the paper extend past the door, then press it down until it clicks shut.

Powering On the Device #

• Turn on the device by holding down the power button on the left-hand side for 3 seconds.

Activating the Device and Adjusting Settings #

1. Select your preferred language.
2. Connect to Wi-Fi:
   • Choose your Wi-Fi network and enter the password.
3. Enter the Device ID:
   • Find the Device ID in your email from Verifone or on the packing slip included with the box.

Downloading Device Updates #

• After entering the Device ID, the device will begin downloading updates.
• The process may take up to 30 minutes.
• Ensure the device remains powered on and connected to the internet until the updates are complete.

Setting Up Delta First Software #

1. Log in to Delta First:
   • On your payment device, enter your subdomain.
   • Enter your username and password to log in.

Finalizing the Setup #

• Once these steps are completed, the T650P device should be ready to use.

Additional Support #

• For further assistance:
  • Contact Woodforest Acceptance Solutions Support at 888-584-2265 and select Option 2.
  • Or, email merchantsupport@woodforestpay.com.

Conclusion #

• By following this tutorial, your T650P device will be fully set up and integrated with Delta First, ready for seamless payment processing.